Hast NdFeB Magnets for Wind Turbine Generator Motors
- Material: N42 NdFeB Magnets, Arc Segment Neodymium Magnets
- Dimension: R(mm)x r(mm)x W(mm)x T(mm)x A℃ with tolerance +/-0.1 or +/-0.05mm
- Magnetizating Direction: Thickness
- Surface Treatment: Znic plating
- Max Working Temperature: 80℃
- Magnetic Properties:
Residual Magnetic Flux Density (Br): 13.0-13.4 KGs (T): 1.30-1.34 T
Energy Density (BH)max: 40-43 MGOe 318-342 KJ/m³
Coercivity Force (Hcb): ≥10.8 KOe ≥860 KA/m
Intrinsic Coercivity Force (Hcj): ≥12 KOe ≥955 KA/m
- Description:
These arc segment magnets used to be applied into permanent magnet disk-type synchronous motors assemblies for small size wind turbine. It can be glued to the flux return steel plate or fixed with screws by countersunk holes.
Besides, the rotor magnets will be corrosive and lead to different proportional weight loss, when working under high temperature, humidity, atmospheric conditions. While wind turbines are used to settled down by sea side or desert, it needs Hast NdFeB Magnet to keep the generator working for durable life. Awesotech Magnetics can produce this kind of Hast Magnets with lower than 2mg/cm2 weight lose under 130 ºC±2ºC, 95% humidity ,2 atmospheric pressure for 100 hours.